95 jimmy dies when shifting into drive/reverse
#1
95 jimmy dies when shifting into drive/reverse
So for the last few days my ride has been having issues, first it wasn't getting enough fuel and would die unless i kept my foot on the gas, (fuel filter and PCV valve were both replaced then a high idle 1500-3500rpm. Ive order a new air control valve and TPS.
While I wait for the parts I went ahead and cleaned the Air control valve with some wd40 and a toothbrush. Thought everything was Ok drove it to work and it idled around 800rpm, Fired it up this morning idle was fine but as soon as i shifted into reverse to exit my parking spot the entire truck shook and Died/ IT did this in both drive and reverse.
While I wait for the parts I went ahead and cleaned the Air control valve with some wd40 and a toothbrush. Thought everything was Ok drove it to work and it idled around 800rpm, Fired it up this morning idle was fine but as soon as i shifted into reverse to exit my parking spot the entire truck shook and Died/ IT did this in both drive and reverse.
Thread
Thread Starter
Forum
Replies
Last Post
teammartinez06
Engine & Transmission
0
12-13-2011 07:20 PM
blazenls
2nd Generation S-series (1995-2005) Tech
2
08-25-2010 06:16 PM
96jimmy4x4in
Steering, Suspension & Drivetrain
6
10-07-2007 09:23 PM