MAF Sensor
#1
10-29-2017, 06:31 AM
MAF Sensor
Quick question-
If I unplug the MAF sensor, should the engine cut off? Tried it for a test and it made little difference in the idle.
The reason I did it is I'm having a p0101 issue I'm trying to track down.
Thanks in advance for y'alls input.
If I unplug the MAF sensor, should the engine cut off? Tried it for a test and it made little difference in the idle.
The reason I did it is I'm having a p0101 issue I'm trying to track down.
Thanks in advance for y'alls input.
#2
10-29-2017, 11:46 AM
https://blazerforum.com/forum/diagno...plained-31561/
See the diagnostic charts in this link. You will need a scanner and a multimeter to diagnose your MAF sensor.
See the diagnostic charts in this link. You will need a scanner and a multimeter to diagnose your MAF sensor.
Last edited by LesMyer; 10-29-2017 at 04:33 PM. Reason: MAF sensor, not MAP sensor.
#3
10-29-2017, 03:30 PM
Originally Posted by Lesmyer
https://blazerforum.com/forum/diagno...plained-31561/
See the diagnostic charts in this link. You will need a scanner, a multimeter, and a hand vacuum pump to diagnose your MAP sensor.
See the diagnostic charts in this link. You will need a scanner, a multimeter, and a hand vacuum pump to diagnose your MAP sensor.
#4
10-29-2017, 04:29 PM
Originally Posted by GreenBlazer2002
I scoured the search function on here and never came across that link. Thanks man!
Thread
Thread Starter
Forum
Replies
Last Post
MikeForS
2nd Generation S-series (1995-2005) Tech
1
03-25-2006 04:43 PM
