Tune up made easy.

Reply Subscribe

Thread Tools

Search this Thread

Jan 29, 2021 | 02:32 PM

Monkeywrench71986

Thread Starter

Beginning Member

Joined: Dec 2020

Posts: 35

From: Rockport Tx

Monkeywrench71986 is on a distinguished road

Tune up made easy.

Tune up easy for your blazer lock steering w 11mm bolt facing up be sure to clear ps cooler line. Separate steering lift up will make access super easy. Left side took literally 10 mins less air box and washer bottle

Last edited by Monkeywrench71986; Jan 29, 2021 at 02:39 PM. Reason: Pushed wrong key missing photos

Jan 29, 2021 | 07:57 PM

AJBert

BF Veteran

Joined: Oct 2007

Posts: 2,871

From: In the Colorado mountains

Or you just put the spark plug socket on that #3 plug and use a wrench on the socket to get the plug out. Saves much more time than removing the interference and reinstalling it.

Jan 29, 2021 | 09:38 PM

Monkeywrench71986

Thread Starter

Beginning Member

Joined: Dec 2020

Posts: 35

From: Rockport Tx

Quote:

Originally Posted by AJBert

Or you just put the spark plug socket on that #3 plug and use a wrench on the socket to get the plug out. Saves much more time than removing the interference and reinstalling it.

I could not gain access to the center drivers plug zero clearance couldn't even get the socket on the plug by hand. Not saying its not possible I just couldn't.

Jan 30, 2021 | 08:03 AM

Walleye Hunter

Junior Member

Joined: Jun 2020

Posts: 339

Walleye Hunter will become famous soon enough

Quote:

Originally Posted by Monkeywrench71986

That's how I did it, only problem was I broke that boot that goes on the joint. I don't see it as a big problem though.

Quote:

Originally Posted by AJBert

Or you just put the spark plug socket on that #3 plug and use a wrench on the socket to get the plug out. Saves much more time than removing the interference and reinstalling it.

Hadn't thought of that but will try it next time, if there is one.