what have you gotten done on your blazer today?
about 160 for everything (including a extra set of tails to cut up) (LED's circuit boards, wires, resistors, voltage regulators, capacitors)
The 3rd brake light was only 2.50 at upull, trailer hitch was pre built as well from amazon for like 30
The 3rd brake light was only 2.50 at upull, trailer hitch was pre built as well from amazon for like 30
Beginning Member
Joined: Apr 2011
Posts: 26
From: Upstate New York
Solved the issue with the 4WD, was a stuck solenoid above the engine. But found a busted motor mount, driver side. Great fun in the sun. Still need to get under it and replace the pinion seal on the back axle
Whats new about these blazers? lol Buy a poly mount or you'll be doing it again like i will in 3 months.
Beginning Member
Joined: Jan 2010
Posts: 43
From: Pensacola, FL
well.. went camping this past weekend, needed to put my jimmy in 4 Hi and found that the front axle isn't engaging. I'm not sure if I'm dealing with a stuck cable, vacuum lines (if its vacuum powered) or the motor for the actuator is dead... I hear the transfer case locking in but the front isn't, so I get an error flash on the dash buttons all but 2 Hi. Gotta get that fixed before the snow fly's
Finally took mine out into some trails. Rained hard here, made the trails much more fun! Got all dirty then hosed everything off. 2 GO pro cameras, one on the front of my truck and one on the back of a buddy in front of me. Cant wait to edit the video and post it up.
