Rough Country 6 inch lift info
#51
hey guys been awhile since i last posted, but i contacted rc and asked why it wont fit the 2dr blazers and their response was the "frames are wider in the 2drs and the cross members wont fit" . now i know this is true for the zr2 but i thought the frame widths were the same between 2dr and 4dr except for the length. anybody willing to go out and measure there frames at the lower control arm mounts and the torsion bar mounts and post it up ill measure my 2dr this weekend.
Cheers!
Cheers!
#54
Hi My name is Tomek, Im from Poland. I have a Blazer from 2000, name LUX... Please look below from this post.
I have to put a 33x12,5r15 Nokian Tires, so i plan put a 3" BL and 6" lift from RC. This kind of lift in Poland is not availabe. I have a possibility to producin it by ownself, 3d modelind, laser cutting, bending, welding etc. So I need a some drawing for details from this kit. If enybody has this kit please measure all pasrt and make some sketch. I can do it by ourself. My mail is: tomchis@wp.pl
Many thanks'
I'll put some more photos from my upgrading....Chevy's...
I have to put a 33x12,5r15 Nokian Tires, so i plan put a 3" BL and 6" lift from RC. This kind of lift in Poland is not availabe. I have a possibility to producin it by ownself, 3d modelind, laser cutting, bending, welding etc. So I need a some drawing for details from this kit. If enybody has this kit please measure all pasrt and make some sketch. I can do it by ourself. My mail is: tomchis@wp.pl
Many thanks'
I'll put some more photos from my upgrading....Chevy's...
#55
i realize this is a mostly dead thread but the question has been bugging me so i did some surfing around the web and found this link.
https://www.gmupfitter.com/files/med...LD_STTruck.pdf
has all the measurements anyone could really want for this and most any frame and suspension debate...
im going to have my 2dr LS 4x4 in the air probably this weekend doing exhaust work so ill poke my nose at seeing how accurate the charts are.
https://www.gmupfitter.com/files/med...LD_STTruck.pdf
has all the measurements anyone could really want for this and most any frame and suspension debate...
im going to have my 2dr LS 4x4 in the air probably this weekend doing exhaust work so ill poke my nose at seeing how accurate the charts are.
Thread
Thread Starter
Forum
Replies
Last Post