hatch release wire polarity
#1
hatch release wire polarity
I just installed a remote start into my blazer. Everything works fine except the hatch no poppy....
Everywhere I have read shows the black/white wire at the switch is the positive trigger, so I wired up a relay to convert the negative output of the R/S to a positive output. I hear the relay clicking, but nothing. Pushing the button still works. Did I wire it wrong? Was it supposed to be a negative trigger?
FYI 97 blazer, no keyless entry from factory... Had to do the contortionist tricks to get all the wires I needed LOL
Everywhere I have read shows the black/white wire at the switch is the positive trigger, so I wired up a relay to convert the negative output of the R/S to a positive output. I hear the relay clicking, but nothing. Pushing the button still works. Did I wire it wrong? Was it supposed to be a negative trigger?
FYI 97 blazer, no keyless entry from factory... Had to do the contortionist tricks to get all the wires I needed LOL
#2
Turns out the doors have to be unlocked to pop the hatch... Does anyone know of a wire I can tap into to get the hatch to open even when locked? Otherwise, it's pretty much useless to use the remote lol
Thread
Thread Starter
Forum
Replies
Last Post
kymatt
2nd Generation S-series (1995-2005) Tech
2
08-27-2010 08:47 PM
scoot
2nd Generation S-series (1995-2005) Tech
1
02-24-2005 09:34 PM