encoder question
#2
When the encoder motor switches to 4HI the shift selector (inside the transfer case) pushes up on the spring loaded ball end. This is considered "closed" and the vacuum from the engine is directed from the vent to atmosphere line to the line that activates the actuator for the front axle.
Thread
Thread Starter
Forum
Replies
Last Post
apross44
2nd Generation S-series (1995-2005) Tech
0
09-21-2010 08:52 PM
OldBlazer
1st Generation S-series (1983-1994) Tech
6
01-10-2007 01:37 AM