Knock sensor problem with body lift
#1
Knock sensor problem with body lift
Ok don't yell at me if I posted in the wrong section.
So I put a body lift on my Jimmy and now the steering shaft rubs on and broke off the connection of the drivers side knock sensor. I looked online and saw that there is a shorter connector plug for the knock sensor but when I ordered it (both online and from an autoparts store) I still just get the one with the normal connector so it will just break off again... I don't know where I can find one that actually has the shorter connector or if there is another way to prevent the connector from being broken. Any ideas would be appreciated.
So I put a body lift on my Jimmy and now the steering shaft rubs on and broke off the connection of the drivers side knock sensor. I looked online and saw that there is a shorter connector plug for the knock sensor but when I ordered it (both online and from an autoparts store) I still just get the one with the normal connector so it will just break off again... I don't know where I can find one that actually has the shorter connector or if there is another way to prevent the connector from being broken. Any ideas would be appreciated.
#2
No idea is that would help you out as I have not heard of your problem but you could look into a a jeep Grand Cherokee intermediate steering shaft swap. Here Tight and responsive steering: Another How-To! YAY. No pics but seems fairly simple.
Thread
Thread Starter
Forum
Replies
Last Post
deadpool
2nd Generation S-series (1995-2005) Tech
4
04-02-2006 06:09 AM
dwoftx
2nd Generation S-series (1995-2005) Tech
1
07-10-2005 06:47 PM