brake squeeking/grinding noise
Thread Starter
|
Starting Member
Joined: Jan 2012
Posts: 130
my hub bearings are are only 5 months old. ive had this problem bfore and the fixed it but im thinking its the same problem there just trying to get me to get somthing fixed thats not needed. if it is rubbing wouldnt i bend it backwards
Last edited by 99bblazer99; Jan 30, 2012 at 11:34 PM.
Starting Member
Joined: Jan 2010
Posts: 171
From: mass
It may be the dust plate, nothing to do with ABS is all I'm saying. He may have to bleed all the brakes, starting from the PS rear, then DS rear, then PS front & DS front, in that order!
I'd be weary of a hub bearing failure & like gio/geo said, lift the front & spin the tires, then I'd feel for where the issues is coming from. If you can get a mechanics stethoscope then that would be a bonus because you could come closer to pin pointing it.
I'd be weary of a hub bearing failure & like gio/geo said, lift the front & spin the tires, then I'd feel for where the issues is coming from. If you can get a mechanics stethoscope then that would be a bonus because you could come closer to pin pointing it.
Last edited by scottl1346; Jan 30, 2012 at 11:50 PM.
Thread Starter
|
Starting Member
Joined: Jan 2012
Posts: 130
mainly when I turn going slow like through a drive through. but today after work I pulled both tires off and found that they had been rubbing so I beat both them back and it does it sometimes but its alot better then what it was. now i got work on getting my brakes to stop squeekin
Starting Member
Joined: Jan 2010
Posts: 171
From: mass
thats when mine where making that grinding sound turning going slow. squeaking brakes could be anything from a little sand to not using brake grease on the back side of the pads i wouldn't worry about it to much
Thread
Thread Starter
Forum
Replies
Last Post
PoppaJoe
Steering, Suspension & Drivetrain
2
Jan 8, 2012 08:23 PM
