Just thought id show you guys what how a real man wires his amp!

 

Naw... Not familiar with what can/will fit in the trucks... yet. As of right now mine still has the factory size battery in it. That's subject to change as soon as I get to installing things in the truck.

 

Nice, can't wait to see that install

 

As soon as I can get free time. That's the problem with working all the time and having 4 kids and a wife to give attention to as well, very little FREE time.

I did pick up the sheet of MDF I needed to build the enclosure with yesterday, so it's officially down to just building everything and installing it.

 

kind of sloppy.
Could look way cleaner if you used spacers lifted it up an inch or so and had all the wiring come out the bottom in the middle.

 

engine noise isnt my favorite kind of sound coming out of my subs. it doesnt look very sloppy to me. should have seen it before i took a trip to lowes.

 

A group 34/78 battery will fit in the stock location.

 

won't get engine noise out of a subwoofer amp. yes i suppose it's possible but i've yet to meet anyone who's actually had that issue with a subwoofer amp. it is common in diy installs with 4 channels though.

 

happened to me two monthes ago. i had them all tied looking nice and neat together and engine noise. if it doesnt happen with subs then why do you still have to run your rcas and remote on the opposite side? wheres the dumb **** smilie?

 

well this section has blown up since Ive last been on here lol. New build coming is 6 Sundown Audio SA-12s, 3 SAZ-2500s, 6 XS power 925s, all in a 6th order bandpass walled at the b-pillar. Should put me high 50s on music. I will put up a build log once we start.