97 blazer build
#31
12-01-2010 | 07:51 AM
Junior Member
Joined: Jun 2010
Posts: 414
From: Germany
Did you figure out a solution to turn the shaft?
If not, just use a suitable wrench. I don`t know your sizes exactly but it should be a 5/8" wrench...
If not, just use a suitable wrench. I don`t know your sizes exactly but it should be a 5/8" wrench...
#32
12-01-2010 | 09:15 AM
Thread Starter
|
Beginning Member
Joined: Oct 2010
Posts: 27
From: indiana
yea got it figured out just gonna use the gear outta the encoder motor and make it easy we got snow on the ground today so in a hurry to complete plus i gotta go and get a universal joint for the drive shaft when i go to the auto parts store for more vacuum hose
#33
12-04-2010 | 09:26 PM
Thread Starter
|
Beginning Member
Joined: Oct 2010
Posts: 27
From: indiana
ok guys got the "simply spray fabric paint" in and here are the results
the middle one is un-painted in order to see the diff.
the middle one is un-painted in order to see the diff.
#34
01-15-2011 | 02:56 PM
Thread Starter
|
Beginning Member
Joined: Oct 2010
Posts: 27
From: indiana
ok decided to go with these seat covers just put em on! also took crappy pics of the shifter and **** ill get better pics of the shifter and also pics of the solenoid for the front diff
Thread
Thread Starter
Forum
Replies
Last Post
Confuused69
Builds
8
03-17-2010 08:14 PM
