Wisco's 4x4 Blazer
#121
Bad news, When I go over a bump the front of the truck slams hard, Im pretty sure one of my shocks failed, probably due to the accident. Will look into it tomorrow, also have a little tire rub on the back of the wheelwell again... Here we go again with the whizzer wheel...
#122
Been a while since I have updated but i'm at college and so is the truck. Only problem I had was a cylinder 3 misfire, turned out to be an injector. That got replaced. So she's running on all 6 again!
Got a cold start vid when it was freezing cold outside here. actual temp was 2 degrees above 0.
Heres some eye candy for ya.
Over winter break I hope to have a couple things done.
Fender Flares off a sonoma Zr2 and Plugs and wires.
Got a cold start vid when it was freezing cold outside here. actual temp was 2 degrees above 0.
Heres some eye candy for ya.
Over winter break I hope to have a couple things done.
Fender Flares off a sonoma Zr2 and Plugs and wires.
#123
Nice build! A lot of the stuff you did to yours I want to do to mine. Good luck with the rest of the build!
#124
What color HID's are you running?
#125
Thanks Witty.
And Vader, they are 35w ballasts and 8000k bulbs.
And Vader, they are 35w ballasts and 8000k bulbs.
#126
looks good
#127
No updates in a while. Truck build is basically put on hold because of school and another project.
I may or may not have bought a 1997 s10 zq8 with a 4.3. And coincidentally got a 5.3 engine out of a 2001 silverado. Not sure what I'm going to do
I may or may not have bought a 1997 s10 zq8 with a 4.3. And coincidentally got a 5.3 engine out of a 2001 silverado. Not sure what I'm going to do
Thread
Thread Starter
Forum
Replies
Last Post
tdbone1
2nd Generation S-series (1995-2005) Tech
15
11-30-2012 06:53 PM
BaLListic_Evo
2nd Generation S-series (1995-2005) Tech
3
06-04-2010 03:38 PM
razman
Steering, Suspension & Drivetrain
11
02-22-2009 01:57 PM