straight pipes??
#21
Join Date: Dec 2006
Location:
Posts: 42

Haha that's with a cammed 383 stroker motor, so it'll be tough to imitate that. you can just simpkly run a super 44 and you'll be close, just without the lope. i have dual super 40s on my '78 and it sounds great at idle. i've driven a stock chevy silverado with just a gibson catback and it sounded pretty mean, smooth and throaty, but without that musclecar rasp.
#22
Super Member
Thread Starter
Join Date: Jan 2008
Location: Wisconsin
Posts: 1,511

ok i think i'll just put a super 44 muffler on. also on my 94 it comes out the passenger side the exhaust exit am i able to straighten that out and have it come out the back? cuz i was thinking of puttin a tip on
#23
sure can. thats how mine is
#24
Super Member
Thread Starter
Join Date: Jan 2008
Location: Wisconsin
Posts: 1,511

yaaa it was urs that i saw that i liked so did u just cut at the bend and go straight back? and what kinda tip do u have cuz i like that tip.
#25
i had an exhaust shop do it.
everything from the y-pipe on back is new. high-flow cat, new piping, magnaflow muffler, tailpipe, tip. eventually, i would like to get either JBA or Edelbrock headers and a new ypipe so its a complete exhaust system
also, the shop custom makes the tips. the tip says "silverline" on it the guy told me that they just took two of the smaller standard tips and welded them to a little y-pipe. he said they primarily put them on corvettes
http://www.ansaautomotive.com/Silverline/index.html
everything from the y-pipe on back is new. high-flow cat, new piping, magnaflow muffler, tailpipe, tip. eventually, i would like to get either JBA or Edelbrock headers and a new ypipe so its a complete exhaust systemalso, the shop custom makes the tips. the tip says "silverline" on it the guy told me that they just took two of the smaller standard tips and welded them to a little y-pipe. he said they primarily put them on corvettes
http://www.ansaautomotive.com/Silverline/index.html
#26
Super Member
Thread Starter
Join Date: Jan 2008
Location: Wisconsin
Posts: 1,511

aight weet thanks dude!
#27
Join Date: Apr 2007
Location:
Posts: 31

i have a dynamax muffler and it sounds amazing. i have dual 3 inch pipes on my s10 blazer. sounds amazing. it doesn't sound rappy like a straight pipe. deep and throaty
videos will be coming
videos will be coming
#28
I will be going to midas to get my exhaust done they charged my brother 150.00 to do a cat back system on his full size chevy all mandrell bent and that includes pipe and flowmaster muffler and his sounds real nice and throaty!!
#29
Super Member
Join Date: Oct 2007
Location: Calgary, AB
Posts: 1,205

here is a soundclip of mine.
http://media.putfile.com/exhaust-70
I just removed the factory muffler and put in a dual chamber resonator. At first I had straight pipes but got sick of it so I needed to tone it down a wee bit, not much but enough.
http://media.putfile.com/exhaust-70
I just removed the factory muffler and put in a dual chamber resonator. At first I had straight pipes but got sick of it so I needed to tone it down a wee bit, not much but enough.
#30
Cliro yours sounds really nice I like it alot, Rcars2 has a flowmaster setup on his and it also sounds really nice!!
Thread
Thread Starter
Forum
Replies
Last Post
cwiththehad
Headers, Intake, & Exhaust
2
11-23-2006 06:24 PM







