When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Building part with 4WD actuator, where might I be able get Portland OR takeoff parts?
General ChatChat about all things Blazer (and related vehicles). Off-topic stuff should be in the lounge, and all mechanical problems should be posted in the proper forum.
Building part with 4WD actuator, where might I be able get Portland OR takeoff parts?
Building part with 4WD actuator, where might I be able get Portland OR takeoff parts?
Trying to build a DIY part for another application with the 02-09 OEM 4WD actuator.
Anyone in the Portland Oregon area know where I might be able to find some used takeoff parts for the Front Intermediate shaft and some CV Cups to get the spline sections of the shafts from?
Looking for these parts, are there any places Close to Portland Oregon to look for these used parts anyone local might know about?
Might anyone know what specific material is typically utilized on the OEM shafts pictured above, or specific material thought to be used if it is not stated anywhere plainly? 4340 maybe?
Still looking for these parts. Possible anyone has some old CVs pictured above kicking around?
There is a small place I found that will allow a person to physically go in and look for parts here somewhat locally, so hoping they have something for me.
Even old worn out CVs will work for my purposes, as I only need the spline, and will machine off the rest. Seemed like the right way to go instead of ~$200 in new parts and destroying them just for a spline that will likely be able to be found as a worn/broken takeoff no longer working part.
Building part with 4WD actuator, where might I be able get Portland OR takeoff parts?
