what have you gotten done on your blazer today?
#9461
I am absolutely exhausted, cab mount on the drivers side is welded in, and bolted up, carpet is back on, new fender is back on the truck. So quiet on the drivers side now, door is still closing messed up though, found out the lower hinge bushing is messed up from how long the door was sagging from the cab mount
So I get to do the bushing, and get a new door latch, since that is destroyed as well.
So I get to do the bushing, and get a new door latch, since that is destroyed as well.
#9462
1995 Gmc Jimmy SLT 4WD
Sat. Evening Re-assembled Front End and Front Diff. Transfer Case and Steering Gear Assy. And CV Flangs after partial dis-assemble when dropping the Oil Pan with Engine in the vehicle. Most difficult lining up Steering Gear mounts To Frame bolts and tedious cleaning all Bolts/Nuts associated with above. - suspensiion and other - these bolts see a dirty life. !!!
Sat. Evening Re-assembled Front End and Front Diff. Transfer Case and Steering Gear Assy. And CV Flangs after partial dis-assemble when dropping the Oil Pan with Engine in the vehicle. Most difficult lining up Steering Gear mounts To Frame bolts and tedious cleaning all Bolts/Nuts associated with above. - suspensiion and other - these bolts see a dirty life. !!!
Last edited by cferry7; 10-14-2013 at 05:50 PM.
#9463
welp,tonight i discovered my front passenger side wheel bearings are poo'd. sounded like gravel on the 30 min drive home. I GUESS its that,as its growling on passenger side like nuts. im 2wd,so nothing 4wd to worry about. Fun. im broke. who wants to donate to the "im too broke" fund? anyone? no? k. LOL
#9465
They look great! I got some new ones the other day too.
Today I replaced my rear brake pads and rotors.
I just love disc brakes! They're so easy to change.
Today I replaced my rear brake pads and rotors.
I just love disc brakes! They're so easy to change.
#9467
Thanks! I think so too, I hate those plastic covers though. I hope the other wheels fit alright. Rear disc would be nice lol I need new brakes.
#9469
Was leaving for work and came outside to a dead battery... Fortunately, I was just early enough that one of the other guys could pick me up. I knew it was weak... Had a few warnings, but has been starting OK up until now. Oh, well...
There were 49 months on the 60 month Exide battery. Inside of 36 months they replace it, then it goes pro-rated. According to their schedule, I would have paid more to exchange it for a new one than it cost to begin with... The pro-rated price is based on full list, but I bought it for trade price.
Shopped online and settled on an Autocraft from Advance Auto Parts. Had a 30% discount code, bought it online and picked up at the local store. Cost the same as Exide, but with a slightly higher capacity.
While I had it out, I painted the battery tray and cleaned the rusty body ground point I found underneath the tray. Now the air bag warning light, which used to come on intermittently, stays on... Seems like the front sensors would be the problem, but I'm not gonna mess with it.
The Blazer starts great, that's all I care about.
There were 49 months on the 60 month Exide battery. Inside of 36 months they replace it, then it goes pro-rated. According to their schedule, I would have paid more to exchange it for a new one than it cost to begin with... The pro-rated price is based on full list, but I bought it for trade price.
Shopped online and settled on an Autocraft from Advance Auto Parts. Had a 30% discount code, bought it online and picked up at the local store. Cost the same as Exide, but with a slightly higher capacity.
While I had it out, I painted the battery tray and cleaned the rusty body ground point I found underneath the tray. Now the air bag warning light, which used to come on intermittently, stays on... Seems like the front sensors would be the problem, but I'm not gonna mess with it.
The Blazer starts great, that's all I care about.
#9470
Well, I must tell yall that tried to help me with the truck shifting hard into park, and sometimes popping itself into reverse once in park.
After replacing the upper cab mount, that then got rid of the 1.5-2" body sag at the front cab mount.
That was the problem with the shifting, now that its all fixed, it shifts into park perfectly.
That is all.
After replacing the upper cab mount, that then got rid of the 1.5-2" body sag at the front cab mount.
That was the problem with the shifting, now that its all fixed, it shifts into park perfectly.
That is all.